Why Frost-trol?

1. From experience.

Since 1957, more than 60 years acquiring knowledge in the commercial refrigeration industry, constantly searching for the best options for our customers and helping them to improve their profitability, their positioning and, ultimately, their results.

1. From experience.

Since 1957, more than 60 years acquiring knowledge in the commercial refrigeration industry, constantly searching for the best options for our customers and helping them to improve their profitability, their positioning and, ultimately, their results.

2. Because of the human team.

More than 500 employees at the service of our customers. With continuous training as a key tool to improve our performance and with the best professionals in the different specialties of our sector working for and with our customers.

2. Because of the human team.

More than 500 employees at the service of our customers. With continuous training as a key tool to improve our performance and with the best professionals in the different specialties of our sector working for and with our customers.

3. Infrastructure and technological capacity.

The continuous improvement of the facilities has culminated in a new 4.0 infrastructure, practically self-sufficient and fully automated. These facilities, inaugurated in 2019, have been equipped with state-of-the-art machinery, complemented with exclusive designs from our own Industrialization Engineering Department. This level of customization and the implementation of the Lean Manufacturing management system has allowed us to improve and optimize both processes and products.

3. Infrastructure and technological capacity.

The continuous improvement of the facilities has culminated in a new 4.0 infrastructure, practically self-sufficient and fully automated. These facilities, inaugurated in 2019, have been equipped with state-of-the-art machinery, complemented with exclusive designs from our own Industrialization Engineering Department. This level of customization and the implementation of the Lean Manufacturing management system has allowed us to improve and optimize both processes and products.

4. For the technical service.

Convinced that after-sales service is fundamental in our sector, we have made a clear commitment to the training of a qualified and experienced team to allow our customers to take care of the development of their business without spending a single minute on potential operating problems. This extremely fast response capability allows us to increase our customers' confidence in our work.

4. For the technical service.

Convinced that after-sales service is fundamental in our sector, we have made a clear commitment to the training of a qualified and experienced team to allow our customers to take care of the development of their business without spending a single minute on potential operating problems. This extremely fast response capability allows us to increase our customers' confidence in our work.

5. For the design of solutions.

We help our customers to enhance their business by improving the presentation of their products with cutting-edge designs, with a great engineering team focused on satisfying the needs they transmit to us, adding value to their business. We seek the aesthetic improvement of the establishments with attractive solutions (improving the image of the product and the brand), practical (cabinets designed to enhance merchandising at the point of sale) and safe (ensuring compliance with product temperatures for proper conservation).

5. For the design of solutions.

We help our customers to enhance their business by improving the presentation of their products with cutting-edge designs, with a great engineering team focused on satisfying the needs they transmit to us, adding value to their business. We seek the aesthetic improvement of the establishments with attractive solutions (improving the image of the product and the brand), practical (cabinets designed to enhance merchandising at the point of sale) and safe (ensuring compliance with product temperatures for proper conservation).

6. For the commitment with the environment.

With the philosophy of respect for the environment as a flag, we are committed to developing clean processes for the production of cabinets with a minimum environmental impact.

- Non-hazardous paints suitable for food use.
- Ozone-friendly refrigerant gases (CO2, propane...).
- Valorization of cabinets in use, with specific restyling areas.

6. For the commitment with the environment.

With the philosophy of respect for the environment as a flag, we are committed to developing clean processes for the production of cabinets with a minimum environmental impact.

- Non-hazardous paints suitable for food use.
- Ozone-friendly refrigerant gases (CO2, propane...).
- Valorization of cabinets in use, with specific restyling areas.

7. For the demand in quality.

In Frost-trol we do not limit ourselves to the compliance of the different regulations or legal requirements, but we impose demanding internal limits that allow us to surpass ourselves and evolve in the improvement.

- Review of each and every unit manufactured to ensure customer satisfaction.
- High dimensional requirements
- Guaranteed refrigeration properties
- Aesthetic quality typical of other more demanding sectors

7. For the demand in quality.

In Frost-trol we do not limit ourselves to the compliance of the different regulations or legal requirements, but we impose demanding internal limits that allow us to surpass ourselves and evolve in the improvement.

- Review of each and every unit manufactured to ensure customer satisfaction.
- High dimensional requirements
- Guaranteed refrigeration properties
- Aesthetic quality typical of other more demanding sectors

8. For the close collaboration with our suppliers.

Our work is complemented by reliable suppliers with whom we have been working for many years, collaborating in the improvement of our processes, helping us to achieve the best products for our customers. Prestigious suppliers in the sector, committed to our customer orientation and knowledgeable about our demanding specifications, prove to be the best partners to continue evolving in our trajectory.

8. For the close collaboration with our suppliers.

Our work is complemented by reliable suppliers with whom we have been working for many years, collaborating in the improvement of our processes, helping us to achieve the best products for our customers. Prestigious suppliers in the sector, committed to our customer orientation and knowledgeable about our demanding specifications, prove to be the best partners to continue evolving in our trajectory.

9. For our ambition, non-conformism and self-demand ( R&D+i).

Non-conformity is the basis for continuous improvement. Our Research, Development and Innovation 4.0 department focuses on differentiation, implementing the best advances in automation, sustainability and artificial intelligence in our cabinets.
The ambition is not only reflected in the continuous research work, but is also marked by the expansion and improvement projects of facilities, the development of new solutions, the optimization of processes...

9. For our ambition, non-conformism and self-demand ( R&D+i).

Non-conformity is the basis for continuous improvement. Our Research, Development and Innovation 4.0 department focuses on differentiation, implementing the best advances in automation, sustainability and artificial intelligence in our cabinets.
The ambition is not only reflected in the continuous research work, but is also marked by the expansion and improvement projects of facilities, the development of new solutions, the optimization of processes...

10. For the individualized treatment with each and every one of our customers.

Our customers are our raison d'être, so their requirements present us with interesting challenges that help us to continue to evolve. We use our extensive knowledge and extensive experience to help our customers to achieve success in their projects, advising them in each of the steps, from the initial approach to after-sales support, with the aim of becoming strategic partners for the development of the activity of both companies.

10. For the individualized treatment with each and every one of our customers.

Our customers are our raison d'être, so their requirements present us with interesting challenges that help us to continue to evolve. We use our extensive knowledge and extensive experience to help our customers to achieve success in their projects, advising them in each of the steps, from the initial approach to after-sales support, with the aim of becoming strategic partners for the development of the activity of both companies.

logo-Frost-trol-bl